Restez informé avec KCVENTS
Solutions de ventilation et CVC

Abonnez-vous à notre newsletter pour recevoir les dernières analyses en ingénierie aéraulique, les mises à jour sur les systèmes ERV/HRV écoénergétiques et les solutions CVC écologiques.

Soyez les premiers à recevoir des guides techniques exclusifs, à découvrir nos capacités OEM/ODM sur mesure et les actualités des salons mondiaux directement de KCVENTS.

Portable Air Conditioners, Dehumidifiers and Heaters

KCVENTS portable climate equipment supports temporary heating, cooling and dehumidification for work areas and project sites. Choose by the dominant thermal or moisture problem, then confirm fuel or power, airflow, exhaust or drainage, operating duty and local safety requirements.

6 résultats affichés

This category is a project-equipment group rather than one single technology: select the product by the dominant thermal problem, fuel or power source and duty cycle. Confirm the required heating or cooling output, airflow, fuel, exhaust, drainage, controls, mobility and local safety requirements before comparing models.

Quick answer

Use diesel or gas heaters for temporary high-output heat where fuel handling and combustion safety are designed. Use the portable air conditioner for mobile cooling, the dehumidifier for moisture removal and the PTC heater for compact electric heat. These functions are not interchangeable.

High-output heat

The Diesel Heater Series page lists 20-150 kW models for temporary work areas and project sites.

Gas heat

The Gas Heater Series page lists 10-50 kW forced-air models; confirm fuel, ventilation and local safety rules.

Mobile cooling

The Industrial Portable Air Conditioner page lists 5,000-51,000 BTU output and dehumidifying mode.

Representative model paths

Use the current product pages for exact outputs, limits and installation details.

Product path Current page evidence Project question
Diesel Heater Series Lists 20-150 kW heating models, 720-4,600 m3/h airflow and tank options. What heat output, fuel consumption and airflow are needed at the site?
Gas Heater Series Lists 10-50 kW forced-air gas-heating models. How will fuel storage, combustion air, exhaust and safety be handled?
Portable Industrial Dehumidifier Lists 60 L/90 L daily extraction options and auto-drain support. What moisture load and drainage path must be maintained?

Specification basis: the linked pages provide the current product ranges. Confirm output at the operating condition, fuel or electrical requirements, exhaust or drain arrangement, sound, protection and local compliance documentation before ordering.

"Good ventilation is essential to maintaining a healthy indoor environment and protecting building occupants from respiratory infections."

The U.S. EPA states that ventilation provides improved indoor air quality and health benefits by reducing the levels of indoor pollutants such as particulate matter (PM), volatile organic compounds (VOCs) and biological pollutants. This is a general ventilation-health context; it does not replace site-specific ventilation and combustion-safety review for fuel-fired equipment. See the EPA source.

Portable heating and cooling questions

Use these answers to prepare a safe equipment brief.

Can a fuel-fired heater be used in any enclosed room?

No. Combustion air, exhaust, fuel storage, carbon-monoxide risk and local regulations must be assessed for the exact installation. A product page is not a substitute for a site safety review.

What is the difference between heating output and airflow?

Heating output describes thermal capacity; airflow describes how much air moves through the unit. Both are needed to assess temperature rise and distribution in the space.

When is a portable dehumidifier preferable to cooling?

Use a dehumidifier when moisture control is the primary problem. Cooling mode may remove some moisture, but capacity, ambient temperature and condensate handling differ by model.

What should be included in a portable-equipment RFQ?

Include the thermal or moisture load, space and duty cycle, fuel or voltage, airflow, exhaust or drain route, mobility, sound, quantity and market-specific safety documents.

Need a model recommendation?

Send the application, required airflow, wall construction, target market, voltage or plug requirement, certification needs and estimated quantity.

KCVENTS can then confirm the suitable model variant, available controls and the documentation required for your project.
Request Project Support