Restez informé avec KCVENTS
Solutions de ventilation et CVC

Abonnez-vous à notre newsletter pour recevoir les dernières analyses en ingénierie aéraulique, les mises à jour sur les systèmes ERV/HRV écoénergétiques et les solutions CVC écologiques.

Soyez les premiers à recevoir des guides techniques exclusifs, à découvrir nos capacités OEM/ODM sur mesure et les actualités des salons mondiaux directement de KCVENTS.

Whole-House ERV & HRV Systems

KCVENTS whole-house ERV and HRV systems provide centralized supply and exhaust ventilation through a coordinated duct layout. Compare product paths by design airflow, external static pressure, heat or moisture recovery requirements, filtration, installation space and controls, then confirm the selected model against the latest datasheet.

5 résultats affichés

A whole-house energy recovery ventilator (ERV) or heat recovery ventilator (HRV) is a centralized ventilation unit that supplies and exhausts air through a coordinated duct layout. Select a KCVENTS system from the design airflow and external static pressure first, then confirm whether the project needs heat-only recovery (HRV) or heat-and-moisture recovery (ERV).

Quick answer

HRV and ERV are not interchangeable labels. Climate, indoor humidity target, duct design, controls and local requirements decide the appropriate configuration; confirm the final design against the code adopted for the project location.

HRV

Transfers sensible heat between exhaust and incoming air. Review for cold or dry climate designs where moisture transfer is not the design objective.

ERV

Transfers heat and some moisture between the air streams. Review for projects where humidity management is part of the ventilation brief.

Centralized

Uses a duct network to coordinate supply and exhaust across multiple rooms, with service access and balancing planned at design stage.

Choose a centralized product path

Confirm the exact model and duty-point data on the product page.

Product path Current page evidence Typical project question
Commercial Energy Recovery Unit Page lists 1,000–6,000 m³/h models and optional PM2.5/HEPA filtration. What airflow, static pressure and filtration level does the commercial duty point require?
KCQR Energy Recovery Unit Page describes a counter-flow heat exchanger, low-consumption motor and Ø100/150/200 mm nozzle options. Which nozzle, installation position and service clearance fit the duct layout?
EPP Energy Recovery Ventilator Page lists EPP housing and CH-EP-150 to CH-EP-350LDC model options. Which airflow/static-pressure variant matches the home's duct system?

Specification basis: the linked product pages are the source for the model and range notes above. Confirm fan curves, heat or moisture transfer performance, sound data, controls, voltage and market-specific compliance documents against the latest datasheet.

“To minimize the electricity use of the heat/energy-recovery ventilator, a stand-alone fully ducted installation is recommended.”

The European Union's Renovation Wave aims to renovate 35 million buildings by 2030, at least doubling the annual rate of energy renovations in the EU. This is a building-renovation target, not a ventilation-equipment forecast; it indicates the scale of retrofit work in which a centralized ERV or HRV system may be considered (European Commission, Renovation Wave).

Whole-house ERV and HRV buying questions

Use these questions to align the product shortlist with the building and duct design.

What is the difference between an ERV and an HRV?

An HRV exchanges sensible heat between exhaust and supply air. An ERV exchanges heat and moisture. The right choice depends on climate, indoor humidity goals, building use and the ventilation design; neither label alone determines compliance.

Why is external static pressure needed for sizing?

Fans deliver different airflow as duct resistance changes. The duty point should include duct length, fittings, filters, terminals and balancing so the selected unit can be checked against its fan curve.

Can a centralized ERV or HRV be selected from floor area alone?

No. Floor area is only one input. Occupancy, room use, required outdoor-air rate, duct resistance, climate, controls and service constraints should be included in the engineering selection.

What ventilation-rate reference should a project use?

The U.S. Centers for Disease Control and Prevention advises aiming for 5 or more air changes per hour (ACH) of clean air in building rooms. This is a public-health ventilation target, not a universal unit-sizing rule. For U.S. residential whole-house projects, ANSI/ASHRAE Standard 62.2 is the applicable residential ventilation reference; apply the edition and local code adopted for the specific project. For background on indoor-air-quality design, see the ASHRAE indoor-air-quality position document and the CDC's Improving Ventilation in Buildings guidance before using ACH as a design input.

Which documents should a project buyer request?

Request the current datasheet, fan curve, sound data, installation dimensions, wiring and control information, filter details, test reports and any market-specific declaration or certification documents that apply to the exact variant.

Need a model recommendation?

Send the application, required airflow, wall construction, target market, voltage or plug requirement, certification needs and estimated quantity.

KCVENTS can then confirm the suitable model variant, available controls and the documentation required for your project.
Request Project Support