Stay Updated with KCVENTS
Ventilation & HVAC Solutions

Subscribe to our newsletter for the latest airflow engineering insights, energy-efficient ERV/HRV system updates, and eco-friendly HVAC solutions.

Be the first to receive exclusive technical guides, custom OEM/ODM capabilities, and global exhibition news directly from KCVENTS.

Portable Dehumidifiers and Climate-Control Equipment

This KCVENTS category groups portable equipment for moisture removal, spot cooling and electric heating. Select by the primary climate-control requirement, operating condition, drainage or exhaust route, electrical supply, mobility and the required safety documentation.

全2件を表示

The Dehumidifier Series combines mobile cooling, moisture removal and electric heating paths for spaces that need temporary or flexible climate control. Choose by the primary problem first: daily moisture extraction, sensible cooling or spot heating. Then confirm operating temperature, drainage, heat output, electrical supply, mobility, sound and service conditions.

Quick answer

Use the Portable Industrial Dehumidifier where moisture removal and continuous drainage are central. Use the Industrial Portable Air Conditioner for mobile cooling with dehumidifying mode. The PTC Electric Heater is a compact electric heating path; it is not a humidity-control device.

Moisture removal

The product page lists 60 L/90 L daily extraction options, humidity control and auto-drain support.

Spot cooling

The product page lists 5,000-51,000 BTU output with cooling, dehumidifying and fan modes.

Spot heating

The PTC page describes portable electric heat with overheat protection and automatic shut-off.

Representative model paths

Confirm output and operating limits against the latest product page.

Product path Current page evidence Project question
Portable Industrial Dehumidifier Lists 60 L/90 L per day options, 30-90% humidity adjustment and continuous drainage. What moisture load and drainage arrangement will the site require?
Industrial Portable Air Conditioner Lists 5,000-51,000 BTU models and cooling, dehumidifying and fan modes. What heat load, exhaust route and movable cooling zone must be covered?
PTC Electric Heater Describes portable heat, overheat protection and automatic shut-off. What electrical capacity and heating safety requirements apply?

Specification basis: the linked product pages currently state the listed ranges and functions. Confirm extraction or cooling performance at the actual temperature, drainage, sound, voltage, protection and service conditions before ordering.

"The conditions inside buildings and structures – especially humidity, thermal conditions, and the presence of chemical, biological and physical contaminants in indoor air – have a significant effect on the health and comfort of occupants."

The Eurovent Certification IAQVS programme aims to balance the energy performance of ventilation systems with indoor air quality, covering pollutants such as CO2 and formaldehyde along with aspects such as humidity. This describes a certification programme's objective; it does not claim KCVENTS participation in the programme. See the Eurovent Certification article.

Portable climate-control questions

Use these answers to distinguish moisture, temperature and ventilation requirements.

Does a dehumidifier replace outdoor-air ventilation?

No. A dehumidifier removes moisture from air in the space. It does not automatically provide the required outdoor-air rate or exhaust path.

Why is continuous drainage important?

Continuous drainage can reduce manual tank emptying during long duty cycles, but the drain route, lift, frost protection and maintenance access must be confirmed for the exact model.

How should a portable air conditioner be specified?

Start with the heat load and occupied area, then check the exhaust arrangement, ambient temperature, condensate handling, power, sound and mobility. BTU alone does not describe the installed result.

What should a climate-equipment RFQ include?

Provide the problem to solve, room volume, moisture or heat load, target humidity or temperature, duty cycle, drainage or exhaust route, voltage, quantity and safety documents.

Need a model recommendation?

Send the application, required airflow, wall construction, target market, voltage or plug requirement, certification needs and estimated quantity.

KCVENTS can then confirm the suitable model variant, available controls and the documentation required for your project.
Request Project Support